CamDRAW 3.6.11
- Tool library expanded:
Tool shape added (cylindrical/conical)
Tool angle (e.g. graver) added
Finishing and roughing feedrate added
Lead-In and Lead-Out informations can be stored in the tool
Tab width can be stored in the tool
Additional information such as material, pierce time etc. can now also be stored in the tool
Added option for duplicate selected tool
Added options for move selected tool upwards and downwards in tool list
Added options for import and export tool library
Added tooltips for all inputs in tool library - Display tool diameter in operation toolpaths:
Support for conical tool --> Display of the correct tool diameter - Added option for normal, finishing and roughing feed rate in any machining operation:
Parameters for different feeds are stored in the tool data
Option specifically for laser, plasma and waterjet cutting for different cutting quality - Added new placeholders for postprocessors to use in G-Code:
<material> --> Tool data e.g. for workpiece or raw material
<pierce_time> --> Tool data Holding time to wait until the material is cut through
<info1> --> Tool data Additional information 1
<info2> --> Tool data Additional information 2
<info3> --> Tool data Additional information 3
<toolpaths_size_x> --> Width of all active tool paths
<toolpaths_size_y> --> Height of all active tool paths - Optimized Lead-Ins and Lead-Outs for contour milling:
Lead direction detection added
Automatic add lead-in or lead-out at longest segment of contour (closed curves)
Combined curves are recognized as belonging together --> required for lead direction detection for inner or outer milling contours - Added cutting data input/area for all machining operations:
The plugin reads the cutting data from the tool data
Now these cutting data can be overwritten for individual operations (If desired, otherwise the tool data are taken over) - Optimized data input (keyboard input) for all operation windows:
Refocus textboxes after drawing
Added progress ring while drawing and generating toolpaths - Changed feedrate for drilling (important):
Feedrate for drilling changed to normal feedrate instead of plunge feed rate
Tool data must be adapted - Added default post processor for Laser / Plasma / Waterjet cutting
One with only XY axis movement
One with XYZ axis movement - Added operation type to tooltip of operation
- Removed "HelpObjects" layer on creation of new CorelDraw document
- Fixed:
Problem with wrong machining directions in contour milling and contour cutting operations
Problem in contour engraving operation with drawing toolpaths left side
Problem with installer if more than one Addon file exists (now all addon files from Shaping folder will copied)
Problem while creation of toolpaths for pocket milling and pocket engraving (Application did not display the toolpaths - layer problem)
Problem with deactivation of selected shapes while add new machining operation
Problem with double toolpaths in contour milling and contour cutting operation if leads are active
