CamDRAW 3.5.10
- Added tangential axis / tangential knife:
Software can now produce G-Code for cnc machines with tangential axis
Tangential axis is rotation axis around the Z-axis (in degree)
Always orients the tangential axis tangential to the contours
With detection for Z upward movement (if angle greater than constant value in postprocessor settings) --> lift off and rotate tangential axis - Added repeatly rapid movement and position on the start of any machining operation
- Changed "turn spindle on" to "turn spindle off" in postprocessor settings:
If next operation needs another tool, then software will turn off spindle on the end of current operation with this text (e.g. M5) - Added post processor for GRBL milling: XYZ axis
- Added post processor for GRBL Carbide 3D milling: XYZ axis
- Added post processor for tangential axis: XYZA axis
Where A is tangential axis - Added post processor for Industrial CNC Routers: XYZ axis
- Added option to show/hide autmatic strategies for generating G-Code
Automatic strategies are for generating G-Code of whole CorelDraw sheet
Default setting is hide the automatic strategies - Added post processor setting: Output without spaces in lines
- Added post processor setting: Inch or Millimeter texts
Software reads out the CorelDraw sheet units before generating
If Inch --> Will take Inch text (mostly G20)
If Millimeter --> Will take Millimeter text (mostly G21)
Placeholder for postprocessor is <units>
